加工廠老闆最近常講的：「切削油越來越貴，回收還要花錢…真的撐不住」
直接問一句…您的水箱乾淨嗎
大部分答案都是
底泥一層 細粉一直跑 切削液越用越髒要如何改善
台中加工廠直接用 #原傳乾濕濾多用型底屑機
效果很直接
底泥抽掉 細粉濾掉 油變乾淨可以繼續用
差別在哪
不用一直換油 廢油量變少（回收費直接降） 加工穩定度提升
老闆一句話：「早點用，早就省一堆」
深入了解
全省服務專線：0989060002
E-mail：seki.email@msa.hinet.net
Line ID：sekiemail
歡迎私訊洽詢或來電交流
#CNC切削液過濾機推薦 #降低廢油回收成本的最佳方案 #水箱底泥清除方法 #提升加工穩定度的關鍵設備 #切削液如何延長使用壽命 #加工廠實測分享 #吸屑機推薦 #原傳底屑機 #CNC水箱清理 #底屑機領導品牌 #CNC加工成本降低案例 #切削液循環再利用 #節能減廢 #智慧製造
What machining factory owners have been saying lately:
“Oil keeps getting more expensive, and recycling even costs money… we really can’t keep up”
Let me ask you directly… is your tank clean?
Most answers are
A layer of sludge at the bottom
Fine particles constantly circulating
Coolant getting dirtier with use
How can this be improved?
A Taichung machining factory directly adopted the #tme dry & wet multi-purpose chip removal machine
The results are immediate
Sludge removed
Fine particles filtered out
Oil becomes clean and can continue to be used
What’s the difference?
No need to keep replacing oil
Less waste oil (recycling costs directly reduced)
Improved machining stability
A boss said it best:
“The earlier we used it, the more we would have saved”
【#tme】
Professional coolant filtration × integrated factory improvement solutions
Helping you regain your margins in a rising cost environment
Learn more
Official website: https://tme-cnc.com/
Fan page: https://www.facebook.com/profile.php?id=100063939464374&mibextid=LQQJ4d
Case studies: https://www.youtube.com/user/sekiemail/videos
E-mail: seki.email@msa.hinet.net
Line ID: sekiemail
Feel free to message us or contact us!
#CNCcoolantFilter #reduceWasteOilCost #tankSludgeRemoval #improveMachiningStability #extendCoolantLife #machiningCaseStudy #chipVacuumMachine #tmeChipRemovalMachine #CNCtankCleaning #chipRemovalLeader #reduceCNCCost #coolantRecycling #energySaving #smartManufacturing
What machining factory owners have been saying lately:
“Oil keeps getting more expensive, and recycling even costs money… we really can’t keep up”
Let me ask you directly… is your tank clean?
Most answers are
A layer of sludge at the bottom
Fine particles constantly circulating
Coolant getting dirtier with use
How can this be improved?
A Taichung machining factory directly adopted the #tme dry & wet multi-purpose chip removal machine
The results are immediate
Sludge removed
Fine particles filtered out
Oil becomes clean and can continue to be used
What’s the difference?
No need to keep replacing oil
Less waste oil (recycling costs directly reduced)
Improved machining stability
A boss said it best:
“The earlier we used it, the more we would have saved”
【#tme】
Professional coolant filtration × integrated factory improvement solutions
Helping you regain your margins in a rising cost environment
Learn more
Official website: https://tme-cnc.com/
Fan page: https://www.facebook.com/profile.php?id=100063939464374&mibextid=LQQJ4d
Case studies: https://www.youtube.com/user/sekiemail/videos
E-mail: seki.email@msa.hinet.net
Line ID: sekiemail
Feel free to message us or contact us!
#CNCcoolantFilter #reduceWasteOilCost #tankSludgeRemoval #improveMachiningStability #extendCoolantLife #machiningCaseStudy #chipVacuumMachine #tmeChipRemovalMachine #CNCtankCleaning #chipRemovalLeader #reduceCNCCost #coolantRecycling #energySaving #smartManufacturing